top of page

The configuration way to avoid GPS drift

May 15, 2025
1 min read

Updated: Aug 18

GPS drift:  normally happens in poor GPS signal or vehicle parking situations, brings wrong coordinates or incorrect speed, triggers false out/in zone alerts, etc. Below picture is an example.



















Solution:

1. Hardware device part: Connect input2 for ACC status detection (All A/S series vehicle GPS tracker input2 wire is default for the ACC status detection)


2. Parameters Configuration, need two commands


Time interval SMS command B03:

000000,B03,X,Y

X is the ACC on time interval, unit is second

Y is the ACC off time interval, unit is second

Eg: 000000,B03,20,100000

When ACC on, data uploads at every 20 seconds interval. When ACC off, data uploads at 100000 seconds interval (almost equal to turn off uploading when ACC off)


Heartbeat interval SMS command S09:

000000,S09,X,Y

X is the ACC on heartbeat interval, unit is second

Y is the ACC off heartbeat interval, unit is second

Eg: 000000,B03,0,300

When ACC on, disable heartbeat uploading. When ACC off, heartbeat uploads at 300 seconds interval.


Why it works?

Heartbeat package without coordinate fields, avoid GPS drift during vehicle parking.

Eg: $$33,866104023192332,36,A10,2,190|46C*6A\r\n


Summary: connect the input2 wire to detect the ACC status, so the device is able to upload the different common/heartbeat package depends on the current ACC ON/OFF status.

 
 
 

Recent Posts

See All
HS code for GPS tracker and related accessories

GPS tracker: 8526911000 Fuel level sensor: 9031809090 Camera: 8525801390 RFID reader: 8471900090 RFID tag: 8523521000 Fingerprint scanner: 9106100000 iButton reader: 8471900090 iButton tag: 8523521000

 
 
 

Comments


bottom of page